Steel Beam Fabricator & Supplier in Uxbridge
SV Steel is a steel beam fabricator and supplier for Uxbridge and the London Borough of Hillingdon. We cut, drill, notch and weld universal beams, columns, channels and RSJs in grade S355 to your engineer's drawings, to BS EN 1090-1, Execution Class 2 (EXC2), from our works minutes away in Denham.
Steel Beams for Uxbridge projects
Uxbridge is a working West London town centre rather than an industrial estate, and the beam work reflects that. It is commercial office and retail frames, mixed-use podiums, civic and education buildings, and a steady stream of alteration and refurbishment work in existing commercial stock where a beam is going in to form an opening or carry a removed wall. We supply both: full frame packages from a beam schedule, and individual cut-and-drilled members for alteration work.
Town-centre plots in Uxbridge are constrained and sit inside the London-wide ULEZ, so beams arrive cut to length, drilled, notched and coped, with cleats and end plates already welded on, ready to set out and bolt. That keeps site work and storage to a minimum on a plot with nowhere to lay steel down. Our Denham works are minutes up the A40, so we deliver just-in-time to the erection slot rather than dropping a load early.
What we make
- Universal beams (UB) and universal columns (UC) for primary structural frames
- Parallel flange channels (PFC), RSJs and structural hollow sections
- Cut to length, drilled, notched, coped and welded to your drawings
- Grade S355 steel, fabricated to BS EN 1090-1 Execution Class 2 (EXC2)
- Shop-primed, hot-dip galvanised or intumescent-coated to your specification
Steel beam specifications
| Section types | Universal beams (UB), universal columns (UC), parallel flange channels (PFC), RSJs, structural hollow sections and built-up plate girders |
|---|---|
| Steel grade | S355 as standard; S275 where a project specifies it |
| Material standard | Hot-rolled sections to BS EN 10025 |
| Fabrication standard | BS EN 1090-1:2009+A1:2011, Execution Class 2 (EXC2), CE marked |
| Supplied as | Cut, drilled, notched, coped and welded to your engineer's drawings |
| Protective treatment | Shop primer, hot-dip galvanising or intumescent fire protection, to spec |
Steel Beams in Uxbridge: common questions
- Do you supply steel beams across Uxbridge and Hillingdon?
- Yes. We fabricate and supply universal beams (UB), universal columns (UC), parallel flange channels (PFC), RSJs and hollow sections in grade S355 across Uxbridge and the wider London Borough of Hillingdon, cut and drilled to your engineer's drawings and fabricated to BS EN 1090-1, Execution Class 2 (EXC2). Send your beam schedule for a free quote.
- Can you supply a single beam for an alteration or opening in Uxbridge?
- Yes. Alongside full frame packages we fabricate individual members for alteration and refurbishment work, cut to length, drilled and with connections welded on, worked from your structural engineer's drawings. Tell us the section, grade and connection detail with your enquiry.
- How quickly can beams reach an Uxbridge town-centre site?
- Uxbridge is minutes from our Denham works via the A40, so we deliver just-in-time to the erection slot. That matters on constrained town-centre plots inside the ULEZ, where there is no room to store steel ahead of the lift.
Need steel beams in Uxbridge?
Send your drawings or schedule and we'll come back with a fabrication quote.